HDG-1 Graphite Preirradiation Data Package Report
This report documents all pre-irradiation examination material-property measurement data for graphite specimens that are going to be used within the first high dose graphite (HDG) -1 irradiation capsule. The two new HDG capsules signify a major change to the AGC Experiment. HDG-1 and HDG-2 will replace the last two Advanced Graphite Creep (AGC) capsules (AGC-5 […]
Qualifying nuclear graphite components using ASME guidelines
Qualifying nuclear graphite components using ASME guidelines, including Semi-probabilistic, probabilistic, and deterministic approaches to design, theory of methods, pre-assessment analysis inputs, post assessment analysis outputs, simplified assessment, full assessment, and application.
AGC-2 Specimen Post Irradiation Data Package Report
This report documents results of the post-irradiation examination material property testing of the creep, control, and piggyback specimens from the irradiation creep capsule Advanced Graphite Creep (AGC)-2 are reported. This is the second of a series of six irradiation test trains planned as part of the AGC experiment to fully characterize the neutron irradiation effects […]
Determining the oxidation behavior of matrix graphite
This work presents the oxidation behavior of matrix graphite in air. Matrix graphite, graphite powder/flakes bonded by a small amount of non-graphitic carbon, surrounds coated fuel particles in order to form cylindrical fuel compacts (in prismatic core designs) or spheres (in pebble-bed reactor designs). This work focuses on oxidation tests conducted on two matrix graphite […]
Graphite Sessions 1-3
International Research & Development Programs Who is doing what in graphite throughout the world Nuclear graphite components Why is graphite so difficult to develop code rules? Unique features of nuclear grade graphite No nuclear graphite standard Brittle material in a pressure vessel code? General graphite behavior and degradation As-fabricated material properties Irradiation behavior Oxidation behavior […]
Advanced Graphite Creep Uncertainty Analysis
Radiation damage estimation is an important component of the post irradiation analysis of the Advanced Graphite Creep (AGC) experiment. It depends primarily on the fast fluence, which is determined using well established methods of spectral adjustment. These are based on best estimates from models such as Monte Carlo N-Particle (MCNP), input cross-sections, and measured activities […]
ART Graphite R&D Introduction
Five Research Areas: Licensing and Code Graphite Research and Development Behavior Models Virgin Properties Mechanisms and Analysis Irradiation
ECAR-3386 AS-RUN THERMAL ANALYSIS OF THE AGC-3 EXPERIMENT
The third Advanced Graphite Creep (AGC-3) experiment was designed to irradiate various types of graphite specimens at a temperature of 900°C. The specimens were irradiated in an instrumented leadout capsule experiment in the east flux trap of the ATR during cycles 152B, 154B, 155A, and 155B. Temperature was monitored using twelve thermocouples located at various […]
FINITE ELEMENT MODEL MESH REFINEMENT EFFECTS ON QUALIFICATION OF NUCLEAR GRADE GRAPHITE COMPONENTS
The American Society of Mechanical Engineers (ASME) provides the full and simplified design-by-analysis probabilistic assessments for determining acceptance of nuclear grade graphite core components. The assessments can be characterized by three parts: (1) a component stress distribution, often determined by a finite element (FE) model; (2) a Weibull probability density function (pdf) that characterizes the […]
Data Report on Post-Irradiation Dimensional Change of AGC-1 Samples
This report documents the measured post irradiation dimensional change in the AGC-1 samples. The AGC-1 capsule is the first in six planned irradiation capsules comprising the Advanced Graphite Creep (AGC) test series. AGC-1 irradiation began September 5, 2009 in the Advanced Test Reactor (ATR) and was completed on January 8, 2011. The capsule was cooled […]