Advanced Microscopy Report on UCO Fuel Kernels from Selected AGR-1 and AGR-2 Experiments
The technical bases for the TRISO-coated particle fuel specifications used by the AGR Program during its fabrication process development and fuel qualification efforts are provided based on historical HTGR fabrication experience in the U.S. and Germany and improvements and insights gained during execution of the AGR Program. The technical bases are provided for specified properties […]
AGR TRISO Fuel Fission Product Release Data Summary
Knowledge of fission product retention in and release from TRISO fuel under normal and off-normal conditions is needed for reactor safety analyses. This is important for coated-particle fuel used in high-temperature reactors relying on the functional containment strategy. Data on the release and retention of key fission products (e.g., Ag-110m, Cs-134, Eu-154, and Sr-90) in […]
AGR-5/6/7 Irradiation Test Final As-run Report
This document presents the as-run analysis of the Advanced Gas Reactor (AGR) 5/6/7 irradiation experiment. AGR-5/6/7 is the last of a series of experiments conducted in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) in support of the development and qualification of tri-structural isotropic (TRISO) low enriched fuel for use in high-temperature gas-cooled […]
Gamma Spectrometry Examination of the AGR-3/4 Irradiation
The results from gamma spectrometry examination of the different components from the combined third and fourth U.S. Advanced Gas Reactor (AGR) TRISO-coated particle fuel irradiation tests (AGR-3/4) have been analyzed. This experiment was designed to provide information about in-pile fission product migration. In each of the 12 capsules, a single stack of four compacts with […]
The AGR-3/4 fission product transport irradiation experiment
AGR-3/4 was the combined third and fourth planned irradiations for the U.S. Department of Energy Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. The primary purpose of the AGR program is to support the development and qualification of tristructural isotropic (TRISO) coated particle fuel for use in High Temperature Gas-cooled Reactors. AGR-3/4 was designed […]
Results of the AGR-2 TRISO fuel performance demonstration irradiation experiment in the Advanced Test Reactor
AGR-2 TRISO Fuel Post-Irradiation Examination Final Report
An array of post-irradiation exams and experiments were employed to assess the irradiation performance and high-temperature behavior of AGR-2 UCO TRISO fuel produced in an engineering-scale coater. Work was also conducted on UO2 TRISO fuel produced for comparison with the AGR UCO fuel. Emphases we replaced on enumerating the frequency of SiC layer failures (failure […]
AGR-2 Irradiation Experiment Fission Product Mass Balance
The Advanced Gas Reactor (AGR) program is in the process of qualifying tristructural isotropic (TRISO)-coated uranium carbide/uranium oxide (UCO) fuel for use in high-temperature gas-cooled reactors (HTGRs) in the United States. The second AGR irradiation (AGR-2) started in the Advanced Test Reactor (ATR) in June 2010 and was completed in October 2013. The first AGR […]
AGR-2 Irradiated Test Train Preliminary Inspection and Disassembly First Look
The AGR 2 irradiation experiment began in June 2010 and was completed in October 2013. The test train was shipped to the Materials and Fuels Complex in July 2014 for post-irradiation examination (PIE). The first PIE activities included nondestructive examination of the test train, followed by disassembly of the test train and individual capsules and […]
AGR-1 Post-Irradiation Examination Test Requirements
As the first in a series of test irradiations for the NGNP Fuel Development and Qualification Program, the AGR-1 Irradiation Experiment is scheduled to begin irradiation in the Advanced Test Reactor in December 2006. At the conclusion of the experiment, the test train will be removed from the reactor and shipped to the Hot Fuel […]